Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 257
8400 HighLine | Parameter setting & configuration
Technology applications
General information
7.1.2 Application cases for a technology application
You should use a technology application if
the task can be solved completely or to a great extent by the basic functionality of the
technology application.
the end customer does not want to create the comprehensive core functions of the
corresponding technology on his own.
the creation time for a project is to be reduced by using the ready-made technology
application
the end customer wants to build upon the know-how of Lenze.
Tip!
If the end customer of the machine does not want to use ready-made Lenze
functions, it is also possible to implement individual drive solutions with the
HighLine version in the form of "free interconnections". In this case, the technology
applications integrated in the device can be used as a basis to be adapted to the
requirements by changes or extensions by means of the function block editor.
Detailed information on the creation or change of interconnections by means of
the function block editor can be found in the main chapter "Working with the FB
Editor". ( 820)
efesotomasyon.com - Lenze