Lenze E84AVHC Series - C00150 | Status word

8400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C00150
614 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
C00150
Parameter | Name:
C00150 | Status word
Data type: UNSIGNED_16
Index: 24425
d
= 5F69
h
Bit-coded device status word
Display area (min. hex value | max. hex value)
0x0000 0xFFFF
Value is bit-coded: Info
Bit 0 FreeStatusBit0 Free status bit 0
Bit 1 PowerDisabled Power switched off
Bit 2 FreeStatusBit2 Free status bit 2
Bit 3 FreeStatusBit3 Free status bit 3
Bit 4 FreeStatusBit4 Free status bit 4
Bit 5 FreeStatusBit5 Free status bit 5
Bit 6 ActSpeedIsZero Current speed is 0
Bit 7 ControllerInhibit Controller is inhibited
Bit 8 StatusCodeBit0 Status code bit 0
Bit 9 StatusCodeBit1 Status code bit 1
Bit 10 StatusCodeBit2 Status code bit 2
Bit 11 StatusCodeBit3 Status code bit 3
Bit 12 Warning Warning
Bit 13 Trouble Fault
Bit 14 FreeStatusBit14 Free status bit 14
Bit 15 FreeStatusBit15 Free status bit 15
; Read access  Write access  CINH  PLC STOP ; No transfer  COM  MOT
efesotomasyon.com - Lenze