Lenze E84AVHC Series - 14.2.26 LS_WriteParamList

8400 HighLine | Parameter setting & configuration
Function library
System blocks | LS_WriteParamList
1090 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
14.2.26 LS_WriteParamList
The LS_WriteParamList system block is used to write a configurable list containing up to 32
local parameters.
The parameter list is created in the same way as the user menu is composed, namely by
means of parameterisation. In the »Engineer«, a user-friendly parameterisation dialog
with import and export functions is available for this purpose.
For the parameter list, up to four sets with different parameter values can be stipulated.
The value set to be used is selected via two selection inputs.
The writing of the parameter list is activated by a FALSE/TRUE edge at the bExecute input.
The parameters are written one at a time every time the main program is executed until
the entire parameter list is processed.
Inputs
Identifier
Data type
Information/possible settings
bExecute
BOOL
FALSEÊTRUE Activate writing of the parameter list
bSelectWriteValue_1
bSelectWriteValue_2
BOOL
Binary coded selection of the value set 1 ... 4 to be used.
bSelectWrite
Value_1
bSelectWrite
Value_2
FALSE FALSE Value set 1 (C01086/1 ... n
)
TRUE FALSE Value set 2 (C01087/1 ... n
)
FALSE TRUE Value set 3 (C01088/1 ... n
)
TRUE TRUE Value set 4 (C01089/1 ... n
)
E'RQH
E6HOHFW:ULWH9DOXHB
E([HFXWH
E6HOHFW:ULWH9DOXHB
)$/6(
)$/6(
,QGH[
9DOXH 9DOXH 9DOXH 9DOXH
,QGH[ 9DOXH 9DOXH 9DOXH 9DOXH
,QGH[
9DOXH 9DOXH 9DOXH 9DOXH
   
,QGH[Q 9DOXHQ 9DOXHQ 9DOXHQ 9DOXHQ

758(
)$/6(
)$/6(
758(
758(
758(
9DOXHV6HW 9DOXHV6HW 9DOXHV6HW 9DOXHV6HW
3DUDPHWHUOLVW
&75/
E)DLO
)DLOVWDWH
)DLOOLQHQXPEHU
)RUPDW&RGHQXPEHU!6XEFRGHQXPEHU!
/6B:ULWH3DUDP/LVW
&
&
&
&
&
&Q
&
&
&
&Q
&
&
&
&Q
&
&
&
&Q
&
&
&
&Q
efesotomasyon.com - Lenze