8400 HighLine | Parameter setting & configuration
Technology applications
TA "Actuating drive speed"
288 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
Related topics:
"GeneralPurpose" functions
( 355)
C00696 L_OffsetGainP_1: Offset 0.00 %
C00697
L_OffsetGainP_2: Offset 0.00 %
C00698
L_OffsetGainP_3: Offset 0.00 %
C00800
L_MPot_1: Upper limit 100.00 %
C00801
L_MPot_1: Lower limit -100.00 %
C00802
L_MPot_1: Acceleration time 10.0 s
C00803
L_MPot_1: Deceleration time 10.0 s
C00804
L_MPot_1: Inactive function 0: Retain value
C00805
L_MPot_1: Init fct. 0: Load last value
C00806
L_MPot_1: Use 0: No
Parameter Info Lenze setting
Value Unit
efesotomasyon.com - Lenze
To Next Page
Loading...