8400 HighLine | Parameter setting & configuration
Basic drive functions (MCK)
Manual jog
412 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
Manual jogging to hardware limit position (limit switch)
[8-15] Example: Manual jogging to positive limit switch
n Positive limit switch
o Deceleration ramp of the quick stop function
If limit switch monitoring has been
switched on and if a limit switch is
approached during manual jogging,
the drive decelerates to a standstill
within the deceleration time set for
the quick stop function.
n
t
TRUE
FALSE
ManJogPos
t
efesotomasyon.com - Lenze
To Next Page
Loading...