Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 717
8400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C00831
C00831/63 L_PCTRL_1: nSet_a
C00831/64 L_PCTRL_1
: nInfluence_a
C00831/65 MCK: nSpeedCtrlI_a
C00831/66 MCK: nPWMAngleOffset_a
C00831/67 Reserved
C00831/68 MCK: nBrkTorqueAdd_a
C00831/69 MCK: nTorqueSetValue_a
C00831/70 MCK: nTorqueLimitAdapt_a
C00831/71 MCK: nSRampOverride_a
C00831/72 MCK: nSpeedSetValue_a
C00831/73 MCK: wMotionCtrl2
C00831/74 MCK: wMotionCtrl1
C00831/75 MCK: nSpeedOverride_a
C00831/76 MCK: nAccOverride_a
C00831/77 MCK: nSpeedAdd_v
C00831/78 MCK: wAuxCtrl
C00831/79 MCK: wSMCtrl
C00831/80 L_OffsetGainP_3
: nIn_a
C00831/81 L_MPot_1
: nIn_a
C00831/82 L_MulDiv_1
: nIn_a
C00831/83 LS_DataAccess: wIn1
(Lenze-internal)
C00831/84 LS_DataAccess: wIn2
(Lenze-internal)
C00831/85 LS_DataAccess: wIn3
(Lenze-internal)
C00831/86 LS_DataAccess: wIn4
(Lenze-internal)
C00831/87 L_PT1_1
: nIn_a
C00831/88 MCTRL: nSpeedHighLimit_a
C00831/89 L_PCTRL_1
: nNSet_a
C00831/90 L_PCTRL_1
: nISet_a
C00831/91 L_Interpolator_1: nPhdIn_v
C00831/92 L_Interpolator_1
: nNIn_a
C00831/93 Reserved
C00831/94 Reserved
C00831/95 Reserved
; Read access Write access CINH PLC STOP ; No transfer COM MOT
Parameter | Name:
C00831 | 16bit input common
Data type: UNSIGNED_16
Index: 23744
d
= 5CC0
h
efesotomasyon.com - Lenze
To Next Page
Loading...
Need help?
General
