Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 835
8400 HighLine | Parameter setting & configuration
Working with the FB Editor
User interface
How to redefine the cutout to be presented:
In the overview window draw a frame around the area of the interconnection
which is to be presented in the drawing window by keeping the left mouse button
pressed:
• The aspect ratio of the frame is automatically adapted to the aspect ratio of the
drawing area.
• According to the size of the frame that is drawn, also the presentation size of
the objects in the drawing area changes.
Tip!
Go to the FB Editor toolbar and click the icon to adapt the view size so that all
objects included in the interconnection are visible in the drawing area.
Automatic scroll ("AutoScroll function")
If you reach a window limitation in the drawing area when shifting an object or in
the overview window when shifting the green frame, and if you then shortly hold
the mouse pointer in this position, an automatic scrolling into the corresponding
direction is carried out:
efesotomasyon.com - Lenze
To Next Page
Loading...