Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 100/970
Syntax
switchport allowed vlan {add [tagged | untagged] | remove} <vlanid>
<vlanid> - VLAN ID (Range: 1 –3965).
add - The interface is always a member of this VLAN. This is equivalent to registration
fixed.
tagged - All frames transmitted for this VLAN will be tagged.
untagged - All frames transmitted for this VLAN will be untagged.
remove - The interface is removed from the member of this VLAN. This is equivalent to
registration forbidden.
Default Setting
None
Command Mode
Interface Config
This command configures the degree of participation for all interfaces in a VLAN. The ID is a
valid VLAN identification number.
Syntax
switchport allowed vlan {add {tagged | untagged} | remove} all <vlanid>
<vlanid> - VLAN ID (Range: 1 –3965).
all - All interfaces.
add - The interface is always a member of this VLAN. This is equivalent to registration
fixed.
tagged - all frames transmitted for this VLAN will be tagged.
untagged - all frames transmitted for this VLAN will be untagged.
remove - The interface is removed from the member of this VLAN. This is equivalent to
registration forbidden.
Default Setting
None
Command Mode
Global Config
To Next Page
Loading...
Need help?
General
