Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 350/970
6.17.1.22 enable passwd
This command changes Privileged EXEC password.
Syntax
enable passwd
Default Setting
None
Command Mode
Global Config.
6.17.1.23 clear ipv6 neighbors
This command will use to clear all entries IPv6 neighbor table or an entry on a specific interface.
Use the <slot/port> parameter to specify the interface.
Syntax
clear ipv6 neighbors [<slot/port>]
<slot/port> - Specify the interface.
Default Setting
None
Command Mode
Privileged Exec
6.17.1.24 clear ipv6 statistics
This command will use to clear IPv6 statistics for all interfaces or for a specific interface,
To Next Page
Loading...
Need help?
General
