Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 235/970
6.4.2.8 spanning-tree max-hops
This command sets the MSTP Max Hops parameter to a new value for the common and
internal spanning tree. The max-hops value is in a range of 1 to 127.
Syntax
spanning-tree max-hops <1-127>
no spanning-tree max-hops
<1-127> - the Maximum hops value (Range: 1-127).
no - This command sets the Bridge Max Hops parameter for the common and internal
spanning tree to the default value.
Default Setting
20
Command Mode
Global Config
6.4.2.9 spanning-tree mst
This command adds a multiple spanning tree instance to the switch. The instance <1-3965> is
a number within a range of 1 to 3965 that corresponds to the new instance ID to be added. The
maximum number of multiple instances supported is 4.
Syntax
spanning-tree mst instance <1-4094>
no spanning-tree mst instance <1-4094>
<1-4094> - multiple spanning tree instance ID.
no - This command removes a multiple spanning tree instance from the switch and
To Next Page
Loading...
Need help?
General
