Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 444/970
7.3.1.11 show ip ospf neighbor brief
This command displays the OSPF neighbor table list. When a particular neighbor ID is
specified, detailed information about a neighbor is given. The information will only be displayed
if OSPF is enabled.
Syntax
show ip ospf neighbor brief {<slot/port> | all}
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Messages
Router ID A 4 digit dotted decimal number representing the neighbor interface.
IP Address An IP address representing the neighbor interface.
Neighbor Interface Index Is a slot/port identifying the neighbor interface index.
State The types are:
Down- initial state of the neighbor conversation - no recent information has been received
from the neighbor.
Attempt - no recent information has been received from the neighbor but a more concerted
effort should be made to contact the neighbor.
Init - an Hello packet has recently been seen from the neighbor, but bi-directional
communication has not yet been established.
2 way - communication between the two routers is bi-directional.
Exchange start - the first step in creating an adjacency between the two neighboring routers,
the goal is to decide which router is the master and to decide upon the initial DD
sequence number.
Exchange - the router is describing its entire link state database by sending Database
Description packets to the neighbor.
Loading - Link State Request packets are sent to the neighbor asking for the more recent
LSAs that have been discovered (but not yet received) in the Exchange state.
Full - the neighboring routers are fully adjacent and they will now appear in router-LSAs and
network-LSAs.
7.3.1.12 show ip ospf range
This command display
s information about the
area ranges for the speci
fied <areaid>.
The
<areaid> identifies the OSPF area whose ranges are being displayed.
To Next Page
Loading...
Need help?
General
