Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 857/970
Command Buttons
Submit - Send the updated screen to the switch and cause the changes to take effect on
the switch but these changes will not be retained across a power cycle unless a save is
performed.
Remove - Remove the selected server from the configuration.
11.2.4.4 Defining IP Filter Configuration
11.2.4.4.1. IP Filter Configuration Page
Management IP filter designates stations that are allowed to make configuration changes to the
Switch. Select up to five management stations used to manage the Switch. If you choose to
define one or more designated management stations, only the chosen stations, as defined by
IP address, will be allowed management privilege through the web manager, Telnet session,
Secure Shell (SSH) or Secure Socket Layer (SSL) for secure HTTP.
Configurable Data
Filter Address 1~5 - Stations that are allowed to make configuration changes to the
Switch.
Command Buttons
Submit - Send the updated screen to the switch. Changes take effect on the switch but
these changes will not be retained across a power cycle unless a save is performed.
To Next Page
Loading...
Need help?
General
