QUANTA LB4M - Vtp Domain; Vtp Mode

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 333/970
Global Config
6.14.2.2 vtp domain
This command uses to set VTP administrative domain name.
Syntax
vtp domain <string>
no vtp domain
<string> - Configures the string for domain name. (maximum length 32 bytes)
no - This command resets the domain name to NULL.
Default Setting
None
Command Mode
Global Config
6.14.2.3 vtp mode
This command uses to set VTP device mode. There are theree modes you can configure,
Client, Server, and Transparent.
Syntax
vtp mode { client | server | transparent }
no vtp mode
no - This command resets the VTP mode to default value.
Default Setting
Transparent