QUANTA LB4M - Storm-Control Unicast

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 163/970
no - This command disables multicast storm recovery mode on the selected interface.
Default Setting
None
Command Mode
Interface Config
This command enables multicast storm recovery mode on all interfaces.
Syntax
storm-control multicast
no storm-control multicast
no - This command disables multicast storm recovery mode on all interfaces.
Default Setting
None
Command Mode
Global Config
6.2.11.4 storm-control unicast
This command enables unicast storm recovery mode on the selected interface.
Syntax
storm-control unicast
no storm-control unicast
no - This command disables unicast storm recovery mode on the selected interface.
Default Setting