QUANTA LB4M User Manual

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 322/970
Default Setting
Disable
Command Mode
Interface Config
6.12.2.9 lldp med confignotification
The user can go to the CLI Interface Configuration Mode to set all the ports to send the
topology change notification, use the lldp med confignotification Interface configuration
command. Use the no lldp med confignotification to disable notifications.
Syntax
lldp med confignotification
no lldp med confignotification
Default Setting
Disable
Command Mode
Interface Config
6.12.2.10 lldp med transmit-tlv
The user can go to the CLI Interface Configuration Mode to set Type Length Values (TLVs) in
the LLDP MED, use the lldp med transmit-tlv [capabilities] [ex-pd] [ex-pse] [inventory]
[location][network-policy] Interface configuration command. Use the no lldp med
transmit-tlv [capabilities] [ex-pd] [ex-pse] [inventory] [location][network-policy] to
remove the TLVs.
Syntax
lldp med transmit-tlv [capabilities] [ex-pd] [ex-pse] [inventory] [location]
[network-policy]
no lldp med transmit-tlv [capabilities] [ex-pd] [ex-pse] [inventory] [location]
[network-policy]
capabilities Transmit the LLDP capabilities TLV.
ex-pd Transmit the LLDP extended PD TLV.
ex-pse Transmit the LLDP extended PSE TLV.

QUANTA LB4M Specifications

General

Brand	QUANTA
Model	LB4M
Category	Switch
Language	English