Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 261/970
information of the dot1x configuration for a specified port or all ports.
Syntax
show dot1x summary {<slot/port> | all}
<slot/port> - is the desired interface number.
all - All interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: The interface whose configuration is displayed.
Control Mode: The configured control mode for this port. Possible values are
force-unauthorized / force-authorized / auto.
Operating Control Mode: The control mode under which this port is operating. Possible
values are authorized / unauthorized.
Reauthentication Enabled: Indicates whether re-authentication is enabled on this port.
Port Status: Indicates if the key is transmitted to the supplicant for the specified port.
6.8.1.8 show dot1x users
This command displays 802.1x port security user information for locally configured users.
Syntax
To Next Page
Loading...