QUANTA LB4M - No Class; Mark Ip-Dscp

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 382/970
Syntax
class <classname>
<classname> is the name of an existing DiffServ class. Note that this command causes the
specified policy to create a reference to the class definition.
Command Mode
Policy-Class-Map Config
6.18.3.8 no class
This command deletes the instance of a particular class and its defined treatment from the
specified policy.
Syntax
no class <classname>
<classname> is the name of an existing DiffServ class. Note that this command removes the
reference to the class definition for the specified policy.
Command Mode
Policy-Class-Map Config
6.18.3.9 mark ip-dscp
This command marks all packets for the associated traffic stream with the specified IP DSCP
value.
Syntax
mark ip-dscp <value>
<value> is specified as either an integer from 0 to 63, or symbolically through one of the
following keywords: af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, be,
cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef.
Command Mode
Policy-Class-Map Config
Policy Type In
Incompatibilities Mark IP Precedence, Police (all forms)