Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 85/970
Mac Address: A unicast MAC address for which the switch has forwarding and/or filtering
information. The format is 6 or 8 two-digit hexadecimal numbers that are separated by
colons, for example 01:23:45:67:89:AB. In an IVL system the MAC address will be displayed
as 8 bytes. In an SVL system, the MAC address will be displayed as 6 bytes. Note: This
software version only supports IVL systems.
Type: This displays the type of the entry. Static entries are those that are configured by the
end user. Dynamic entries are added to the table as a result of a learning process or
protocol.
Description: The text description of this multicast table entry.
Interfaces: The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
6.2.2.6 show mac-address-table igmpsnooping
This command displays the IGMP Snooping entries in the Multicast Forwarding Database
(MFDB) table.
Syntax
show mac-address-table igmpsnooping
Default Setting
None
Command Mode
Privileged Exec
Display Message
Mac Address: A unicast MAC address for which the switch has forwarding and/or filtering
information. The format is 6 or 8 two-digit hexadecimal numbers that are separated by
colons, for example 01:23:45:67:89:AB. In an IVL system the MAC address will be displayed
as 8 bytes. In an SVL system, the MAC address will be displayed as 6 bytes. Note: This
software version only supports IVL systems.
Type: This displays the type of the entry. Static entries are those that are configured by the
end user. Dynamic entries are added to the table as a result of a learning process or
protocol.
Description: The text description of this multicast table entry.
Interfaces: The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
6.2.2.7 show mac-address-table multicast
To Next Page
Loading...
Need help?
General
