Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 532/970
transmitted on this interface. By default, the value is 30 seconds.
8.4.1.3 show ip pimdm interface stats
This command displays the statistical information for PIM-DM on the specified interface.
Syntax
show ip pimdm interface stats {<slot/port> | all}
<slot/port> - Interface number.
all - this command represents all interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: Valid slot and port number separated by forward slashes.
IP Address: This field indicates the IP Address that represents the PIM-DM interface.
Nbr Count: This field displays the neighbor count for the PIM-DM interface.
Hello Interval: This field indicates the time interval between two hello messages sent from
the router on the given interface.
Designated Router: This indicates the IP Address of the Designated Router for this
interface.
8.4.1.4 show ip pimdm neighbor
This command displays the neighbor information for PIM-DM on the specified interface.
Syntax
To Next Page
Loading...
Need help?
General
