Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 242/970
show logging buffered
Default Setting
None
Command Mode
Privileged Exec
Display Message
Message: The message that has been logged.
Note: Message log information is not retained across a switch reset.
6.5.3 show logging traplog
This command displays the trap log maintained by the switch.
The trap log contains a maximum of 256 entries that wrap.
Syntax
show logging traplogs
Default Setting
None
Command Mode
Privileged Exec
Display Message
Number of Traps since last reset:
The number of traps that have occurred since the last reset of
this device.
Trap Log Capacity:
The maximum number of traps that could be stored in the switch.
Log:
The sequence number of this trap.
System Up Time:
The relative time since the last reboot of the switch at which this trap occurred.
Trap:
The relevant information of this trap.
Note:
Trap log information is not retained across a switch reset.
To Next Page
Loading...
Need help?
General
