Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 156/970
dst-ip - Sets the mode on the destination IP address.
dst-src-ip - Sets the mode on the source and destination IP addresses.
no - Restore the mode to be default value.
Default Setting
dst-src-ip
Command Mode
Interface Config
6.2.10.7 port-channel name
This command defines a name for the port-channel (LAG). The interface is a logical slot and
port for a configured port-channel, and name is an alphanumeric string up to 15 characters.
This command is used to modify the name that was associated with the port-channel when it
was created.
Syntax
port-channel name {<logical slot/port> | all} <name>
<logical slot/port> - Port-Channel Interface number.
all - all Port-Channel interfaces.
<name> - Configured Port-Channel name (up to 15 characters).
Default Setting
None
Command Mode
Global Config
6.2.10.8 adminmode
This command enables a port-channel (LAG) members. The interface is a logical slot and port
for a configured port-channel.
To Next Page
Loading...