Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 577/970
Syntax
show ipv6 ospf database database-summary
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Messages
Router Total number of router LSAs in the OSPFv3 link state database.
Network Total number of network LSAs in the OSPFv3 link state database.
Inter-area Prefix Total number of inter-area prefix LSAs in the OSPFv3 link state database.
Inter-area Router Total number of inter-area router LSAs in the OSPFv3 link state
database.
Type-7 Ext Total number of NSSA external LSAs in the OSPFv3 link state database.
Link Total number of link LSAs in the OSPFv3 link state database.
Intra-area Prefix Total number of intra-area prefix LSAs in the OSPFv3 link state database.
Link Unknown Total number of link-source unknown LSAs in the OSPFv3 link state
database.
Area Unknown Total number of area unknown LSAs in the OSPFv3 link state database.
AS Unknown Total number of as unknown LSAs in the OSPFv3 link state database.
Type-5 Ext Total number of AS external LSAs in the OSPFv3 link state database.
Self-Originated Type-5 Total number of self originated AS external LSAs in the OSPFv3
link state database.
Total Total number of router LSAs in the OSPFv3 link state database.
9.4.1.7 show ipv6 ospf interface
This command displays the information for the IFO object or virtual interface tables.
Syntax
show ipv6 ospf interface {<slot/port> | loopback <0-7> | tunnel <0-7>}
<slot/port> - Interface number.
<0-7> - Loopback/Tunnel Interface ID.
Default Setting
None
Command Mode
Privileged Exec, User Exec
To Next Page
Loading...
Need help?
General
