QUANTA LB4M - Ip Ospf Cost; Ip Ospf Dead-Interval

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 463/970
Command Mode
Interface Config
7.3.2.28 ip ospf cost
This command configures the cost on an OSPF interface.
Syntax
ip ospf cost <1-65535>
no ip ospf cost
< 1-65535 > - The range of the cost is 1 to 65535.
<no> - This command configures the default cost on an OSPF interface.
Default Setting
The default cost value is 10.
Command Mode
Interface Config
7.3.2.29 ip ospf dead-interval
This command sets the OSPF dead interval for the specified interface.
Syntax
ip ospf dead-interval <1-2147483647>
no ip ospf dead-interval