Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 568/970
Syntax
ipv6 nd managed-config-flag
no ipv6 nd managed-config-flag
no – This command resets the “managed address configuration” flag in router
advertisements to the default value.
Default Setting
False
Command Mode
Interface Config
9.3.2.9 ipv6 nd ns-interval
This command sets the interval between router advertisements for advertised neighbor
solicitations, in milliseconds. An advertised value of 0 means the interval is unspecified.
Syntax
ipv6 nd ns-interval { <1000 – 3600000> | 0 }
no ipv6 nd ns-interval
no – This command resets the neighbor solicit retransmission interval of the specified
interface to the default value.
Default Setting
0
Command Mode
Interface Config
9.3.2.10 ipv6 nd other-config-flag
This command sets the “other stateful configuration” flag in router advertisements sent from the
To Next Page
Loading...
Need help?
General
