Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 162/970
Ethernet port exceeds the high threshold percentage (as represented in “Broadcast Storm
Recovery Thresholds” table) of the link speed, the switch discards the broadcasts traffic
until the broadcast traffic returns to the threshold percentage or less. The full
implementation is depicted in the “Broadcast Storm Recovery Thresholds” table.
Default Setting
Disabled
Command Mode
Interface Config
This command enables broadcast storm recovery mode on all interfaces.
Syntax
storm-control broadcast
no storm-control broadcast
no - This command disables broadcast storm recovery mode on all interfaces.
Default Setting
Disabled
Command Mode
GlobaI Config
6.2.11.3 storm-control multicast
This command enables multicast storm recovery mode on the selected interface.
Syntax
To Next Page
Loading...
Need help?
General
