Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 290/970
6.8.6.3 port-security max-static
This command sets the maximum number of statically locked MAC addresses allowed on a
specific port.
Syntax
port-security max-static [<0-20>]
no port-security max-static
no - This command resets the maximum number of statically locked MAC addresses
allowed on a specific port to its default value.
Default Setting
20
Command Mode
Interface Config
6.8.6.4 port-security mac-address
This command adds a MAC address to the list of statically locked MAC addresses.
Syntax
port-security mac-address <mac-addr> <1-3965>
no port-security mac-address <mac-addr> <1-3965>
<1-3965> VLAN ID
<mac-addr>
no - This command removes a MAC address from the list of statically locked MAC
addresses.