Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 67/970
Flow Mode: Displays flow control mode.
Capabilities Status: Displays interface capabilities.
6.2.1.2 show interface status description
This command displays the interface information for the system.
Syntax
show interface status description <slot/port>
<slot/port> - is the desired interface number.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: The physical slot and physical port.
if Index: Indicates the if Index of the interface table entry associated with this port.
Description: Description string attached to a port. It can be of up to 64 characters in length.
MAC Address: Displays the physical address of the specified interface.
Bit Offset Value: Displays the bit offset value which corresponds to the port when the MIB
object type PortList is used to manage in SNMP.
MDI Status: The current status for MDI/MDIX.
MDI Config: The user config for MDI/MDIX.
6.2.1.3 show interface counters
This command displays a summary of statistics for a specific interface or all interfaces.
Syntax