Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 310/970
The table contains the following column headings:
Interface: Shows the interface in slot/port format.
Transmit Total: Total number of LLDP packets transmitted on the port.
Receive Total: Total number of LLDP packets received on the port.
Discards: Total number of LLDP frames discarded on the port for any reason.
Errors: The number of invalid LLDP frames received on the port.
Ageouts: Total number of times a complete remote data entry was deleted for the port
because the Time to Live interval expired.
TVL Discards: Shows the number of TLVs discarded
TVL Unknowns: Total number of LLDP TLVs received on the port where the type value is in
the reserved range, and not recognized.
6.12.1.4 show lldp remote-device
This command uses to display summary information about remote devices that transmit
current LLDP data to the system. You can show information about LLDP remote data received
on all ports or on a specific port.
Syntax
show lldp remote-device {<slot/port> | all}
<slot/port> - Displays a specific interface.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Local Interface: Identifies the interface that received the LLDPDU from the remote device.
Chassis ID: Shows the ID of the remote device.
Port ID: Shows the port number that transmitted the LLDPDU.
System Name: Shows the system name of the remote device.
6.12.1.5 show lldp remote-device detail
This command uses to display detailed information about remote devices that transmit current
LLDP data to an interface on the system.
To Next Page
Loading...
Need help?
General
