Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 430/970
Default Setting
None
Command Mode
Privileged Exec, User Exec
7.2.2 Configuration Commands
7.2.2.1 routing
This command enables routing for an interface.
Syntax
routing
no routing
no - Disable routing for an interface.
Default Setting
Enabled
Command Mode
Interface Config
7.2.2.2 ip routing
This command enables the IP Router Admin Mode for the master switch.
Syntax
To Next Page
Loading...
Need help?
General
