EasyManuals Logo

QUANTA LB4M User Manual

QUANTA LB4M
970 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #148 background imageLoading...
Page #148 background image
UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 148/970
Last Querier Address: Displays the IP address of the last querier from which a query was
snooped on the VLAN.
6.2.9.2 Configuration Commands
6.2.9.2.1. Set MLD snooping querier admin mode
The user can go to the CLI Global Configuration Mode to set MLD snooping querier admin
mode, use the ipv6 mld snooping querier global configuration command. Use the no ipv6
mld snooping querier to disable.
Syntax
ipv6 mld snooping querier
no ipv6 mld snooping querier
Default Setting
Disable
Command Mode
Global Configure
6.2.9.2.2. Set MLD snooping querier address
The user can go to the CLI Global Configuration Mode to set MLD snooping querier address,
use the ipv6 mld snooping querier address <ipv6-address> global configuration command.
Use the ipv6 mld snooping querier address <ipv6-address> return to default value zero.
Syntax
ipv6 mld snooping querier address <ipv6-address>
no ipv6 mld snooping querier address <ipv6-address>
Default Setting
0
Command Mode
Global Configure
6.2.9.2.3. Set MLD snooping querier querier interval
The user can go to the CLI Global Configuration Mode to set MLD snooping querier querier
interval, use the ipv6 mld snooping querier querier-interval <1-1800> global configuration
command. Use the no ipv6 mld snooping querier query-interval return to default value zero.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QUANTA LB4M and is the answer not in the manual?

QUANTA LB4M Specifications

General IconGeneral
BrandQUANTA
ModelLB4M
CategorySwitch
LanguageEnglish

Related product manuals