Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 335/970
Command Mode
Global Config
6.14.2.6 vtp trunkport
This command uses to configure the adminstrative domain trunk port for all of interfaces.
Syntax
vtp trunkport all
no vtp trunkport all
no - This command resets the adminstrative domain trunk port to default value.
Default Setting
Disabled
Command Mode
Global Config
This command uses to configure the adminstrative domain trunk port on specific interfaces.
Syntax
To Next Page
Loading...