Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 621/970
Command Mode
Global Config
10.1.2.5 cluster auto-add enable
This command will discover new candidate switches and add the member switch to cluster
automatically.
Syntax
cluster auto-add enable
no cluster auto-add enable
no - This command will disable this function.
Default Setting
This function is disabled by default. That means that the candidate switches are not
automatically added to the cluster.
Command Mode
Global Config
10.1.2.6 clear cluster candidate-table
This command will clear list of the candidate switches that discovered by the commander
switch.
Syntax
clear cluster candidate-table
Default Setting
None
Command Mode
Privileged Exec
To Next Page
Loading...
Need help?
General
