QUANTA LB4M - Show Commands; Show Ip Dhcp Filtering; Configuration Commands; Ip Dhcp Filtering

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 501/970
7.10.1 Show Commands
7.10.1.1 show ip dhcp filtering
This command displays the DHCP filtering configuration.
Syntax
show ip dhcp filtering
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: Specifies the interface by slot/port.
Trusted: Indicates whether the interface is trusted or untrusted.
7.10.2 Configuration Commands
7.10.2.1 ip dhcp filtering
This command enables DHCP filtering globally.
Syntax
ip dhcp filtering
no ip dhcp filtering
no - This command disables DHCP filtering globally
Default Setting
Disabled
Command Mode
Global Config