Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 231/970
Syntax
spanning-tree protocol-migration {<slot/port> | all}
no spanning-tree protocol-migration {<slot/port> | all}
<slot/port> - is the desired interface number.
all - All interfaces.
no - This command disables BPDU migration check on a given interface. The all option
disables BPDU migration check on all interfaces.
Default Setting
None
Command Mode
Global Config
6.4.2.3 spanning-tree configuration
This command sets the Configuration Identifier Name for use in identifying the configuration
that this switch is currently using. The <name> is a string of at most 32 alphanumeric
characters.
Syntax
spanning-tree configuration name <name>
no spanning-tree configuration name
<name> - is a string of at most 32 alphanumeric characters.
no - This command resets the Configuration Identifier Name to its default.
Default Setting
The base MAC address displayed using hexadecimal notation as specified in IEEE 802
standard.
Command Mode
To Next Page
Loading...
Need help?
General
