Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 204/970
SSL3 and TSL1.
Hard-timeout: Display the hard timeout for secure HTTP sessions in hours.
Soft-timeout: Display the soft timeout for HTTP sessions in minutes.
Max-sessions: Display the number of allowable HTTP sessions.
Secure-hard-timeout: Display the hard timeout for secure HTTP sessions in hours.
Secure-soft-timeout: Display the soft timeout for HTTP sessions in minutes.
Secure-max-sessions: Display the number of allowable HTTP sessions.
6.3.6.2 ip javamode
This command specifies whether the switch should allow access to the Java applet in the
header frame of the Web interface. When access is enabled, the Java applet can be viewed
from the Web interface. When access is disabled, the user cannot view the Java applet.
Syntax
ip javamode
no ip javamode
no - This command disallows access to the Java applet in the header frame of the Web
interface. When access is disabled, the user cannot view the Java applet.
Default Setting
Enabled
Command Mode
Global Config
6.3.6.3 ip http port
This command is used to set the http port where port can be 1-65535 and the default is port 80.
Syntax
To Next Page
Loading...
Need help?
General
