QUANTA LB4M - Area Nssa No-Redistribute; Area Nssa No-Summary

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 451/970
Syntax
area <areaid> nssa default-info-originate [<1-16777214>] [{comparable
|
non-comparable}]
<areaid> - Area ID.
<1-16777214> - The metric of the default route. The range is 1 to 16777214.
comparable - It's NSSA-External 1.
non-comparable - It's NSSA-External 2.
Default Setting
None
Command Mode
Router OSPF Config
7.3.2.8 area nssa no-redistribute
This command configures the NSSA ABR so that learned external routes will not be
redistributed to the NSSA.
Syntax
area <areaid> nssa no-redistribute
<areaid> - Area ID.
Default Setting
None
Command Mode
Router OSPF Config
7.3.2.9 area nssa no-summary
This command configures the NSSA so that summary LSAs are not advertised into the NSSA
Syntax