QUANTA LB4M - Configure; Disconnect

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 362/970
Syntax
reload [slot <unit> ]
<unit> - Reload the specified unit.
Default Setting
None
Command Mode
Privileged Exec
6.17.12 configure
This command is used to activate global configuration mode
Syntax
configure
Default Setting
None
Command Mode
Privileged Exec
6.17.13 disconnect
This command is used to close a telnet session.
Syntax
disconnect {<0-10> | all}
<0-11> - telnet session ID.
all - all telnet sessions.