Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 619/970
Command Mode
Privileged Exec
User Exec
Display Message
SN: Serial number.
MAC Address: The MAC address of switch.
IP Address: The IP address of switch
Name: The switch name.
Device Type: The switch type
10.1.2 Configuration Commands
10.1.2.1 cluster
This command will enable the switch cluster network management.
Syntax
cluster
no cluster
No - This command will disable the switch cluster network management.
Default Setting
disable
Command Mode
Global Config
10.1.2.2 cluster register timer
This command will set interval of sending cluster packet for switch cluster network
management.
Syntax
cluster register timer <time-value>
no cluster register timer
No - This command will restore the default setting.
Default Setting
To Next Page
Loading...
Need help?
General
