QUANTA LB4M - Vlan; Vlan Name

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 93/970
Syntax
vlan database
Default Setting
None
Command Mode
Global Config
6.2.3.8 vlan
This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN identification
number (ID 1 is reserved for the default VLAN). VLAN range is 2-3965.
Syntax
vlan <vlanid> [<name>]
no vlan <vlanid>
<vlanid> - VLAN ID (Range: 2 –3965).
<name> - Configure an optional VLAN Name (a character string of 1 to 32 alphanumeric
characters).
no - This command deletes an existing VLAN. The ID is a valid VLAN identification
number (ID 1 is reserved for the default VLAN). VLAN range is 2-3965.
Default Setting
None
Command Mode
VLAN database
6.2.3.9 vlan name
This command changes the name of a VLAN. The name is an alphanumeric string of up to 32
characters, and the ID is a valid VLAN identification number. ID range is 1- 3965.