Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 262/970
Display Message
User: Users configured locally to have access to the specified port.
6.8.1.9 show radius-servers
This command is used to display items of the configured RADIUS servers.
Syntax
show radius-servers
Default Setting
None
Command Mode
Privileged Exec
Display Message
IP Address: IP Address of the configured RADIUS server
Port: The port in use by this server
Type: Primary or secondary
Secret Configured: Yes / No
Message Authenticator: The message authenticator attribute configured for the radius
server.
6.8.1.10 show radius
This command is used to display the various RADIUS configuration items for the switch.
Syntax
To Next Page
Loading...
Need help?
General
