Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 95/970
This command removes the association of a MAC address to a VLAN.
Syntax
vlan association subnet <ipaddr> <netmask> <vlanid>
no vlan association subnet <ipaddr> <netmask>
<ipaddr> - The IP address.
<netmask> - The subnet mask.
<vlandid> - VLAN identification number. ID range is 1-3965.
no - This command removes association of a specific IP-subnet to a VLAN.
Default Setting
None
Command Mode
VLAN database
6.2.3.12 vlan makestatic
This command changes a dynamically created VLAN (one that is created by GVRP registration)
to a static VLAN (one that is permanently configured and defined). The ID is a valid VLAN
identification number. VLAN range is 2-3965.
Syntax
vlan makestatic <vlanid>
<vlanid> - VLAN ID (Range: 2 –3965).
Default Setting
None
Command Mode
VLAN database
6.2.3.13 protocol group
This command attaches a <vlanid> to the protocol-based VLAN identified by <group-name>. A
To Next Page
Loading...
Need help?
General
