QUANTA LB4M - Tacacs Key

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 286/970
no - This command is used to remove all of configuration.
Default Setting
None
Command Mode
Global Config
6.8.5.2 tacacs key
This command is used to configure the TACACS+ authentication and encryption key.
Syntax
tacacs key <key-string>
no tacacs key
Note that the length of the secret key is up to 128 characters.
< key-string > - The valid value of the key.
no - This command is used to remove the TACACS+ server secret key.
Default Setting
None
Command Mode
Global Config
This command is used to configure the TACACS+ authentication and encryption key.
Syntax
key <key-string>
Note that the length of the secret key is up to 128 characters.
< key-string > - The valid value of the key.