Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 390/970
Syntax
show diffserv service brief [ in ]
Default Setting
None
Command Mode
Privileged EXEC
Display Message
DiffServ Admin Mode The current setting of the DiffServ administrative mode. An attached
policy is only active on an interface while DiffServ is in an enabled mode.
The following information is repeated for interface and direction (only those
interfaces configured with an attached policy are shown):
Interface The slot number and port number of the interface (slot/port).
Direction The traffic direction of this interface service.
OperStatus The current operational status of this DiffServ service interface.
Policy Name The name of the policy attached to the interface in the indicated direction.
6.18.5.5 show policy-map
This command displays all configuration information for the specified policy.
Syntax
show policy
-map [<policy-map-name
>]
<policy-map-name> is the name of an existing DiffServ policy.
Default Setting
None
Command Mode
Privileged EXEC
Display Message
Policy Name The name of this policy.
Policy Type The policy type, namely whether it is an inbound or outbound policy definition.
The following information is repeated for each class associated with this policy
To Next Page
Loading...
Need help?
General
