QUANTA LB4M - Clear Ip Arp-Cache; IP Routing Commands; Show Commands; Show Ip Brief

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 421/970
no - This command configures the default ageout time for IP ARP entry.
Default Setting
The default value is 1200.
Command Mode
Global Config
7.1.2.10 clear ip arp-cache
This command causes all ARP entries of type dynamic to be removed form the ARP cache. If
the [gateway] parameter is specified, the dynamic entries of type gateway are purged as well.
Syntax
clear ip arp-cache [gateway | interface <slot/port>]
Default Setting
None
Command Mode
Privileged Exec
7.2 IP Routing Commands
7.2.1 Show Commands
7.2.1.1 show ip brief
This command displays all the summary information of the IP.
Syntax
show ip brief
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
Default Time to Live: The computed TTL (Time to Live) of forwarding a packet from the local