Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 473/970
Default Setting
None
Command Mode
Privileged Exec
Display Message
Domain Lookup Status: Enable or disable the IP Domain Naming System (DNS)-based
host name-to-address translation function.
Default Domain Name: The default domain name that will be used for querying the IP
address of a host.
Domain Name List: A list of domain names that will be used for querying the IP address of a
host.
Name Server List: A list of domain name servers.
Request: Number of the DNS query packets been sent.
Response: Number of the DNS response packets been received.
7.5.1.3 show dns cache
This command displays all entries in the DNS cache table.
Syntax
show dns cache
Default Setting
None
Command Mode
Privileged Exec
Display Message
Domain Name List: Domain Name
IP Address: IP address of the corresponding domain name.
TTL: Time in seconds that this entry will remain in the DNS cache table
Flag: Indicates if this entry is reliable. A value of 8 is not as reliable as a value of 10.
To Next Page
Loading...
Need help?
General
