Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 535/970
8.5.1 Show Commands
8.5.1.1 show ip pimsm
This command displays the system-wide information for PIM-SM.
Syntax
show ip pimsm
Default Setting
None
Command Mode
Privileged Exec
Display Message
Admin Mode: This field indicates whether PIM-SM is enabled or disabled. This is a
configured value.
Join/Prune Interval (secs): This field shows the interval at which periodic PIM-SM
Join/Prune messages are to be sent. This is a configured value.
Data Threshold Rate (Kbps): This field shows the data threshold rate for the PIM-SM router.
This is a configured value.
Register Threshold Rate (Kbps): This field indicates the threshold rate for the RP router to
switch to the shortest path. This is a configured value.
Interface: Valid slot and port number separated by forward slashes.
Interface Mode: This field indicates whether PIM-SM is enabled or disabled on the interface.
This is a configured value.
Protocol State: This field indicates the current state of the PIM-SM protocol on the interface.
Possible values are Operational or Non-Operational.
8.5.1.2 show ip pimsm componenttable
This command displays the table containing objects specific to a PIM domain. One row exists
for each domain to which the router is connected.
Syntax
To Next Page
Loading...
Need help?
General
