Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 171/970
Default Setting
None
Command Mode
Global Config
6.2.13.3 port-monitor session mode
This command configures the mode parameter to enabled the administrative mode of the
session. If enabled, the probe port monitors all the traffic received and transmitted on the
physical monitored port.
Syntax
port-monitor session <session-id> mode
no port-monitor session <session-id> mode
<session-id> - Session ID.
no - This command disables port-monitoring function for a monitor session.
6.3 Management Commands
6.3.1 Network Commands
6.3.1.1 show ip interface
This command displays configuration settings associated with the switch's network interface.
The network interface is the logical interface used for in-band connectivity with the switch via
any of the switch's front panel ports. The configuration parameters associated with the switch's
network interface do not affect the configuration of the front panel ports through which traffic is
switched or routed.
Syntax
To Next Page
Loading...
Need help?
General
