QUANTA LB4M - Dot1 X Re-Authentication; Dot1 X Re-Reauthenticate

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 276/970
or modified, the system should use the new one.
Syntax
dot1x max-user <number>
no dot1x max-user
<number> - maximum users (Range: 0 – 600).
no - This command sets the system will reset the maximum users to infinity
Default Setting
no limitation
Command Mode
Interface Config
6.8.3.10 dot1x re-authentication
This command enables re-authentication of the supplicant for the specified port.
Syntax
dot1x re-authentication
no dot1x re-authentication
no - This command disables re-authentication of the supplicant for the specified port.
Default Setting
Disabled
Command Mode
Interface Config
6.8.3.11 dot1x re-reauthenticate