Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 475/970
Privileged Exec
7.5.2.3 ip domain-name
This command defines the default domain name to be appended to incomplete host names
(i.e., host names passed from a client are not formatted with dotted notation).
Syntax
ip domain-name <name>
no ip domain-name <name>
<name> - Default domain name used to complete unqualified host names. Do not
include the initial period that separates an unqualified name from the domain name.
(Range: 1-64 characters)
Default Setting
None
Command Mode
Global Mode
7.5.2.4 ip domain-list
This command defines the domain name that can be appended to incomplete host names (i.e.,
host names passed from a client are not formatted with dotted notation). The domain name
table can contain maximum 6 entries.
Syntax
ip domain-list <name>
no ip domain-list <name>
<name> - Default domain name used to complete unqualified host names. Do not include
the initial period that separates an unqualified name from the domain name. (Range: 1-64
characters)
Note - When an incomplete host name is received by the DNS server on this switch, it will
work through the domain name list, append each domain name in the list to the host
name, and check with the specified name servers for a match. If there is no domain name
list, the domain name specified with the "ip domain-name" command is used. If there is a
To Next Page
Loading...
Need help?
General
