QUANTA LB4M - Clear Eventlog; Clear Logging Buffered; Clear Traplog

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 341/970
Privileged Exec
6.17.1.2 clear traplog
This command clears the trap log.
Syntax
clear traplog
Default Setting
None
Command Mode
Privileged Exec
6.17.1.3 clear eventlog
This command is used to clear the event log, which contains error messages from the system.
Syntax
clear eventlog
Default Setting
None
Command Mode
Privileged Exec
6.17.1.4 clear logging buffered
This command is used to clear the message log maintained by the switch. The message log
contains system trace information.